Stone and Pavers

Recommended Products: ProClean MOLD, MILDEW and ALGAE™

Suggested Dilution Rate: Full Strength to 3:1

Instructions: Remove dirt and debris from stone and/or paver area to be clean. We recommend the use a pump sprayer to spray cleaner onto all surfaces. Give the product sufficient time to work…slight agitation might be required…don’t let product dry on surface, Rinse thoroughly with a pressure washer or garden hose. Areas which have built up mold, algae or even cooking oils around grills may require longer dwell time or repeated application.

Description: ProClean MOLD, MILDEW and ALGAE™ is specifically formulated to remove mold and algae stains and the smells they create. It also contains cleaners that will release dirt, plant stains, animal waste, food stains and oil stains. ProClean MOLD, MILDEW and ALGAE™ is safe to use around plants provided the product is through rinse from foliage. ProClean MOLD, MILDEW and ALGAE™ is a strong base, and should be use with caution around and rinse heavily acid loving plants.

Below is an application on a School wall in Virginia.  The wall, which shielded air conditioning equipment, had significant mold growth.  The Split block was first sprayed with a garden hose. Pre-wetting porous material like these block as well as stone and concrete is recommended. ProClean MOLD, MILDEW and ALGAE™ was applied with a Garden pump sprayer. You will notice that the block initially turns yellow. This is the product interacting with fungi. The wall was then rinsed thoroughly with a pressure washer.

split block

porter wall in progress         porter wall in progress close

Related information

Comments are currently closed.